BSPDH - CLEARVIEW STREP A TEST (REAGENT 2)

  • MSDS: BSPDH
  • Manufacturer: UNIPATH CO
  • Product Name: CLEARVIEW STREP A TEST (REAGENT 2)
  • National Stock Number: 6550-00F031788
Product Identification

Product ID:CLEARVIEW STREP A TEST (REAGENT 2)
MSDS Date:10/24/1990
FSC:6550
NIIN:00F031788
Kit Part:Y
MSDS Number: BSPDH

Responsible Party
UNIPATH CO
850 MAUDE AVE
MOUNTAIN VIEW, CA 94043
US

Emergency Phone: 415-969-5533

Info Phone: 415-969-5533

Cage: 65261

Contractor
UNIPATH CO
MOUNTAIN VIEW, CA 94043 US

Telephone: 415-969-5533

Cage: 65261

Ingredients

ACETIC ACID (GLACIAL)

CAS: 64-19-7

RTECS: AF1225000

Fraction By Weight: 3.5% ML

OSHA PEL 25 MG/CUM

ACGIH TLV: 25 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT): 5085 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF INGESTED. CAN CAUSE BURNS
TO SKIN & EYES, IRRITATING VAPOR.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: IMMEDIATELY IRRIGATE
W/STERILE WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER. INGESTION:
WASH OUT MOUTH W/CLEAN WATER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Handling

Handling and Storage Precautions:STORE AT 2-30C. DON'T FREEZE. FOR
IN-VITRO DIAGNOSTIC USE. REAGENTS 1 & 2 FORM AN ACID WHEN COMBINED.
Other Precautions:STANDARD GUIDLINES FOR HANDLING INFECTIOUS AGENTS &
CHEMICAL REAGENTS SHOULD BE OBSERVED THROUGHOUT ALL PROCEDURES. ALL
MATERIAL OF BIOLOGICAL ORIGIN SHOULD BE HANDLED AS THOUGH
POTENTIALLY INFECTIOUS .

Exposure Controls

Supplemental Safety and Health
CLEARVIEW TEST UNIT: WHITE PLASTIC MOULDING ENCASING A TEST STRIP
CONTAINING SEPARATE ZONES OF IMMOBILISED RABBIT ANTI-STREP A
ANTIBODY & GOAT ANTIRABBIT ANTIBODY.

Chemical Properties

Appearance and Odor:SEE SUPPLEMENTAL INFORMATION

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING

Disposal

Waste Disposal Methods:USE STANDARD LABORATORY WASTE DISPOSAL PROCEDURE
UNDER LOCAL REGULATIONS FOR POTENTIALLY INFECTIOUS MATERIALS.
DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.